• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Patio Door Lock Repairs

Over time, the wear and tear can cause lock malfunctions. Fortunately, there are several simple and efficient ways to restore your uPVC patio door lock repair (Bravejournal published a blog post) door's security.

Whether it's realigning the lock or cleaning the mechanism that locks these simple fixes will make your home more secure.

Clean the Lock

Although patio doors are an excellent way to let the outside in and keep the elements out but they can also pose a security risk when your lock isn't functioning as it should. Over time wear and tear extreme cold and hot weather dirt and debris could cause damage to the lock on your patio door and cause it to become difficult to open. With a little effort, you can make sure that your lock for your patio door always works correctly.

In the beginning, it's essential to clean your patio door's lock and all of its moving parts. This helps to remove any dirt and coatings that could be preventing the lock from working as it should. Start by wiping down the moving parts of the lock for your patio door with a damp cloth, then make use of a scouring pad, or a rough damp cloth to scrub any difficult-to-access areas of the door or frame that are coated with dirt. Then, wipe the entire lock with dry cloths to eliminate any remaining dampness, and allow it to dry completely before making use of it again.

If you have a patio door that uses a pin tumbler latch mechanism You can grease the lock by applying graphite powdered to the key or applying a lubricant made of Teflon, like WD-40 Multi-Use. This type of lubricant is easy to apply and it doesn't dissolve with time. If you're unable to locate the right lubricant for your needs, you can use a pencil with an extremely thick tip. Insert the pencil into the lock and move it around a bit to distribute the graphite.

Regular maintenance is also essential to keep the tracks of sliding patio doors free from dirt, dust and other debris. These tracks are especially susceptible to snow, ice and other debris, which can cause them get stuck or to bind. This could make it difficult for your patio door to open and close.

You can clean the track rails and rollers of sliding patio doors by removing weather stripping that is dirty or damaged. Clean it and replace it. The same is true for patio door rollers, which can be wiped down and sprayed with a non-stick lubricant to help them move freely.

Lubricate the Moving Parts

uPVC french doors, which are similar to sliding patio doors, work with 3 to 4 or sometimes 5-point locking mechanisms which include the lock cylinder and handle operated by keys. These doors also require maintenance, including lubrication of the moving parts. This can be done using a thin oil (never WD40) and should be done once per year.

If sagging hinges aren't a cause, the door may be misaligned and caught or rubbing against the strike plate hole in the frame. The solution is to remove the strike plate and use an abrasive chisel to increase the size of the mortise that it rests in. This will allow the latch to fit properly into the hole and prevent it from hitting the frame.

Once the cylinder is cleared of the way and out of the way, measure its width using an object or a piece of wood that fits into the gap of adjustment screw above the lock. The outer dimension is measured from the outside of the door to the center of cylinder. The inner dimension is measured from the center adjustment screw until the end cylinder.

Check the lock's length

If your glass patio door repair door latch is difficult to turn, even after cleaning and oiling, it's possible that it's not aligned properly with the strike plate. Verify that the door is balanced and if the hinge screws are tight however, in many instances, moving the strike plate up or down could fix the problem.

Oftentimes, the problem occurs when the strike of the lock is too small for the latch to properly engage. In this instance, you can widen the hole with a chisel and hammer. Then test the latch to ensure that it doesn't touch the jamb frame of the door or get caught the frame.

Before you purchase a replacement lock, first determine what kind of mortise lock you have. This can be done by looking at the faceplate and determining if it is round or square. Examine each screw hole on the existing lock, and note their size. This will enable you to locate an alternative lock that is exactly the same width and fits into the hole that you already have.

In addition to identifying the current mortise lock, you'll also need to check it for any nicks or bends that may require repairing. A bent or damaged latch is more likely to break than one that's not utilized often, so make sure to replace the lock with a new, secure version if you find any signs of damage or wear.

Once you've checked the lock and identified which kind of replacement you require then it's time to begin working on the actual repair. The spindle and handle should be removed from the doorway to the patio door repair. Introduce the new handle. Begin by installing the interior handle. Align it with the spindle, and then secure it in by using two screws or bolts. Once the handle in the interior is installed, put in the handle on the outside and screw it in the position as well. After you've completed these steps check the handles to make sure that they open and shut easily and that the latch engages properly with the strikeplate.

Make sure the door's strike is checked

The strike plate and the door latch are two parts which work together to secure the door. An incorrectly aligned strike plate and door latches can result in the latch not being able to latch the door properly. This issue is usually easy to fix.

First, examine the holes in the strike plate's receiving to make sure they are free of obstructions, such as dirt or plastic plugs. Release the screws that hold the strike plate. This allows it to move vertically but not separate it from the frame. Then, you can adjust the strike plate so that its holes for receiving align with the latch hooks on the door latch. After the strike plate has been adjusted, tighten the screws and then test the door to determine whether it shuts easily with the new adjustment.

Door strike plates can be a bit difficult to access for homeowners with sliding patio doors, but they are essential to lock and unlock your door. The metal plates are situated between the top and bottom jambs of the door, which are where they help support the latch. Then, the door latch slides into the strike plate to form a seal when closed. If the strike plate is damaged, rusted, or is not properly installed, the latch may not lock the door properly.

One common reason for an outdoor door lock to not close or not close is a misalignment between the latch and the strike plate. This can be checked with the "lipstick" test. Apply some lipstick along the edge of the deadbolt, then cover it with masking tape. The lipstick will leave the mark when you close the door. This will show you exactly where the latch joins the strike plate. If the mark is too high or low it is possible to adjust the strike plate.

Sliding patio door locks help protect your home from burglars, and if they're not functioning correctly, you should solve the issue fast. Follow these simple steps to fix your patio door frame repair door lock and restore it's functionality.