• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat leave and come back as they please without you having to let them in or out. They also can help to keep your cat from having to go to the bathroom in the house.

Fitting a cat flap in a upvc door panel is much simpler than installing one in a glass door, but it will require some expertise and the appropriate tools.

Take a measurement of the door

Fitting a cat flap in the door isn't easy but if you select the right kind of cat flap make sure you take your time and follow the steps provided it shouldn't be too much trouble. We will be showing how to trace the shape, then use a jigsaw to cut out the door's opening and then finish the job by fixing the flap to the door. This will ensure that the flap remains in place and protects the door from wind and rain which can cause damage.

The first thing you need to do is measure the width of your pet in order to determine an accurate estimate of what size of cat flap glass door installation near me flap you will need. This will enable you to choose a cat flap that is large enough for your pet to enter the house and leave without having to open the door every time.

Once you have the measurements you can determine where on the door the template should be placed, typically this is done using an X, but some kits include drawings that show where to drill, if yours does then stick it to the door and use a pencil to draw around it. If your door has a sill or moulding at the bottom, be sure that you leave enough space between your cat and these elements.

Use a set square to check that you're cutting correctly and to make sure the hole is a good rectangle shape. Once you are happy with this, you can begin removing the rest of the door material. If you have a square that you have cut, make use of it to verify whether you're cutting in the right way and to ensure that the hole is a good rectangle shape, once you are happy with this you can begin to take off the remaining door material.

Draw a Line

The cat flap allows you to let your pet go inside and out without worrying about unwanted visitors or unwelcome gifts. It also prevents drafts and helps to keep the temperature in your home steady. Fitting a cat flap to your door may seem daunting to those who haven't done it before. A lot of people will hire an expert carpenter or joiner to do the job. While this is certainly an option, it's possible to do the job yourself if you own the appropriate tools and follow the instructions carefully.

It is much easier to accomplish on doors made of wood, however it is still possible using uPVC. However you should be cautious not to damage the doors since this could cause the door to be damaged and invalidate your warranty. First, you need to examine the door's measurements to ensure that it can accommodate the new cat-flap. If you have an ordinary uPVC panel it's easy. However in the case of made of composite or another kind of door, you may have to be more cautious.

The next step is to measure the height of your cat's belly. This is the distance from the floor to the bottom of the cat's stomach and you'll need to find a spot on the door where this measurement will fall within the range your cat flap step is able to comfortably walk through. Once you know this you'll be required to mark the area with pencil and a spirit level to be certain that the hole you will make will be suitable for your cat flap installers.

After you have marked the area, it's time to cut the hole. You will need the jigsaw, and it is crucial to take your time in order to ensure that the cuts are smooth and straight, rather than uneven and rough, since this could damage your door. Wear safety glasses and a dust mask while using a jigsaw. Inhaling sawdust can be harmful for your health. After you've finished the cutting process, you will need to smooth out the edges of the hole using sandpaper so that your cat flap will fit easily in place.

Make a hole

The process of fitting a cat flap to an existing door panel or double glazing sealed unit can be difficult. If you are not very proficient in DIY, it is best to hire an expert to do the job for you. A botched job could not only be ugly, but also pose security risks. It could allow cold air to enter when the cat is outdoors and hot air out when it is inside.

The hole's location should be marked on the door using a pencil and spirit level. This will ensure it is properly positioned and aligns with the door's other parts. Make sure you have some sandpaper on the ready to smooth any edges.

Wear the safety equipment you'll need to use an electric tool. If you are worried about the noise of the jigsaw, you can purchase a cordless version which is quieter and simpler to use.

It is best to only remove the material that is required to fit the flap. It is important to leave a little extra material to cover the wall of the flap. However cutting away too much could cause issues or even damage to the door frame.

A door made of upvc could contain a metal frame or a panel inside that could interfere with the microchip cat flap in this case you will need to cut an over-sized hole to ensure that the metal doesn't touch the wall of the cat flap. If this is done, fitting a cat flap it is essential to fill in the gap and make it watertight.

If you're planning to install a cat flap into a upvc or double-glazed window with metal frames, you'll need to consult a specialist. They will offer you a brand new piece of glass with the hole already pre-made for the cat flap. This will be less expensive than fitting a cat flap inside an existing pane that was not designed for this purpose.

Fit the Flap

Cat flaps let your pet leave and come whenever they want, allowing them the freedom to relax inside the house whenever they want to. If you have a uPVC front door, it can be hard to install a cat flap. This is especially true when you don't have glass panels that can be cut. If you're willing to install a half-glazed uPVC replacement panel, it's possible to add an additional cat flap in bifold doors flap. It's not as simple as making a hole in the door though and there are a few things you'll need first to ensure that it's safe.

A composite, uPVC, or GRP door panel typically comprises an flimsy plastic outer layer joined to a soft polystyrene insulating core. The material is fairly fragile and care should be taken when cutting through it to avoid damaging. This type door comes with a template that can be used to cut the hole.

Once you've determined the position of the hole in your door, it's now time to fit the cat flap. You can buy and fit various models, from basic push-button operated models to ones that are activated by microchips that allow only your pet. However, no matter what kind of cat flap you select, it is essential to ensure that your cat can use the flap and not get trapped in the weather.

A circular fitting is superior than a square one, as circles can be cut more securely into glass. This is because square holes can make the glass more susceptible to cracking when drilling is applied to it. It's also a safer choice to use since you're not at risk of having to drill into toughened glass that might break and hurt your pet or your family. This is especially important if you have a young or elderly person in your home who may be injured by shards glass.