• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cozy method of heating your home without harmful gases or soot. They are simple to set up and operate just like an electric fire.

The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic-acid Amplification test that will be used with BioFire filmArray Systems for detection of known and emerging human acoronaviruses from nasopharyngeal oropharyngeal swabs as well as saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative to wood or gas. The fuel is made from plant by-products and utilizes an organic process to convert sugars into alcohol. It has many benefits over other types of fireplaces, including the absence of harmful emissions and a lower carbon footprint. Bioethanol is a safer alternative to other types of fireplaces because it doesn't emit smoke or soot. It also requires no flue, so it can be set up anywhere in your home or garden.

Multi-drug resistant bacteria (MDR) are one of the health threats that are most dangerous today. Fortunately, new testing methods can help detect MDR bacteria and other infections earlier to prevent further complications. BioFire FilmArray is one such test. This test utilizes an approach based on symptoms to identify pathogens that could cause sepsis. Its results are available within a matter of hours, so providers can begin treatment immediately.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions or billions of copies. This permits the analysis of small samples of body fluids or tissues to determine if specific genetic sequences are present. It is a useful instrument for lab professionals and will help them identify serious illnesses efficiently and cost-effective manner. The BioFire film array PCR system is an ingenuous instrument for the diagnosis of infectious diseases. It can be utilized in a variety of environments, including hospitals and laboratories.

In the case of respiratory tests, a simple swab can be applied to your nose and sent to the lab for analysis. BioFire's system lets clinicians take action quickly and has a short turnaround time. This means that patients will have better outcomes and spend less time waiting for results.

The Chanouf Farm Biofire company has developed an agroforestry recycling system that makes use of olive and pear waste to make organic charcoal and biomass power. The resulting products are offered to the public as a sustainable alternative to traditional wood charcoal and coal briquettes. These bio ethanol fuel fireplace-waste products are also suitable for burning in a Kachelofen fireplace, which produces radiant heat and is a greener alternative to gas or electric fires.

Clean burning

When you utilize bio-fire, you're not just reducing energy consumption, you're also helping the environment by using a sustainable fuel source. The combustion of bioethanol does not release harmful gases, such as carbon dioxide. Instead, it releases water vapour and heat. This makes it a safer and healthier option for indoor use.

Ethanol is made from the fermentation of sugars in plants and is classified as an alternative source of energy that can be used to generate renewable fuel. It can be produced rapidly and will not be as depleted as fossil fuels like oil and coal. Bioethanol can also help reduce the dependency on imports from foreign countries and reduces the risks associated with shortages in supply.

The bio-fires can be installed easily, and can be placed in existing fireplace openings, or as an independent unit. This makes them a great alternative to wood and gas fires. They are a great choice for homes and offices that do not have chimneys.

When a bio-fire is lit, a specific media is installed in the burner that absorbs liquid fuel ethanol while making it ready for combustion. The ethanol is then burned by the flames and the vapours are expelled into the air via the vent. This makes the flames appear more natural and give a mesmerising beauty that can't be replicated with wood or gas fires.

Bio-fires have the advantage of not needing a vent or flue to replenish oxygen used during combustion. They don't emit carbon monoxide which is released into the room by open fronted gas fireplaces.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This lets doctors identify and rule out respiratory illness much faster than with conventional lab tests, which require visits to the patient. Both patients and the health system benefit from this.

Safe indoors

Bio-fires are far safer to use indoors compared to real fires because they release no smoke or ash, nor carcinogenic fumes. They also do not emit carbon monoxide, which can be fatal if inhaled. However, the bio-ethanol fuel is flammable and you must be careful when handling your burner and refilling it. It should be filled only after the burner is shut off and the fire is cool, and any spills should be cleaned immediately.

The diagnostics offered by the company's FilmArray systems--BioFire 2.0 and BioFire Torch are easy to use, and run eight different commercially available US Food and Drug Administration approved diagnostic panels as well as three additional panels that have been approved for use in emergency situations and six environmental test panels. These tests include a respiratory test panel designed to quickly detect and differentiate respiratory illnesses such as COVID-19. emerging coronaviruses, and COVID-19.

The Biomedical Advance Research and Development Initiative, a part of the US Department of Defense Strategic Access Program, has awarded the COVID-19 Panel a grant. The COVID-19 test is an antigen-based method, allowing clinicians to distinguish between symptoms caused by COVID-19 or other respiratory diseases with a similar degree of accuracy as the rapid antigen tests currently in use.

The company is also in the process of developing a test for SARS-CoV-2 for its Respiratory Panel 2.1. This multiplexed nucleic acids amplifying test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens in saliva and nasopharyngeal samples in less than an hour. The test is being developed in a accelerated timeline and submission to the FDA for EUA and 510(k) approval is expected in the third quarter of 2020.

Bio ethanol fire basket-ethanol flame effect fires are safe to use, however they must be kept away objects that are combustible, such as curtains, pillows, and blankets. They should not be set near anything that could ignite, and you should always keep flammable items at least 10 feet from them. The bioethanol fireplace inserts fuel should be kept in a secure, dry location that isn't easily reached by children or pets.

Simple to use

The bioethanol fireplace has no chimney to worry about. All you need is a place to put it and some fuel. Once you've filled it and lit it, ignite it. This will give the appearance of a real flame. Once the flame is started it will heat the room with little or no smoke. It will also generate plenty of heat, similar to what wood-burning fireplaces do. They are also easy to maintain and do not require any servicing. A quick wipe down is all they need.

The BioFire RP2.1 Test, EZ unlike other tests that use a syndromic method to identify common infectious diseases symptoms it can give results in 45 minutes. This test is suitable for patients with upper-respiratory symptoms and has a specificity rate of 98 percent. The test can identify up to 19 viruses and three bacteria in one test, making it a great option for the treatment of patients.

The BioFire platform combines multiplex testing, sample preparation and results reporting into one platform. This allows laboratories to simplify their processes and eliminate the need for a sequential procedure that involves individual and send-out tests. This can result in better outcomes for patients, since the correct test is selected first time, and the need for expensive culture-based tests is eliminated. In addition, the BioFire system can detect pathogens and their associated resistance genes to antimicrobials at a molecular level, providing information that is more accurate than traditional bioethanol fireplace methods.

Molecular diagnostics are increasingly being utilized to improve patient care and outcomes. The BioFire panel RP2.1+ utilizes a syndromic method to simultaneously target 23 pathogens that are commonly implicated in respiratory infections. The test can be run on the BioFire FilmArray 2.0 and Torch systems and delivers results in about 45 minutes.

The test is available in the US under FDA Emergency Use Authorization. It will be commercially available after the initial DoD requirements are met. The BioFire Defense team has developed a fully automated, test-to-result assay that allows for the rapid detection of COVID-19. This assay is in the process of development and will be available after initial DoD demand is met.